SA x KPYK AK-74S (SA-PJ12 PRIME™) ASTER V3™ BLDC™ – Black / Tan

Specna Arms x KPYK airsoft rifle AK-74S PRIME™ (SA-PJ12 J-Series) in black and tan finish offers a steel receiver with Nano Coating finish, genuine KPYK® accessories for real AK rifles, a Dark Matter™ brushless motor and a GATE ASTER V3 ETU unit. Inside, you will find a MAGNUS™ TDC hop-up chamber, a precision 6.02 mm inner barrel and a reinforced V3 QSC gearbox.

Technical Specifications

• Power system: AEG
• Gearbox: V3 QSC
• Material: Steel, metal, polymer
• Rifle length: 730–950 mm
• Weight: 3920 g
• Muzzle velocity: 130 m/s
• Recommended BB weight: 0.28–0.30 g
• Inner barrel length: 450 mm
• Inner barrel diameter: 6.02 mm
• Hop-up: Yes (TDC system)
• Control unit: GATE ASTER V3
• Firing modes: Semi, Full Auto, Binary, Pre-Cocking and more
• Thread: 24mm CW
• Compatible battery: 11.1V Li-Po (not included)
• Connector: T-Dean (under the receiver cover)
• Battery type: Stick
• Magazine capacity: 175 BBs (2 included)
• Motor type: Brushless (short shaft)

Package Contents

• Specna Arms x KPYK® AK-74S PRIME™ AEG rifle
• 2× S-Mag mid-cap magazines (175 BBs)
• Small Tamiya adapter
• Speedloader
• M90 spring
• M115 spring (installed in rifle)
• M135 spring
• Specna Arms stickers
• User manual
• GATE ASTER SE programming card (instructions)

Warnings

• Springs from some manufacturers are significantly overpowered (e.g., an M130 may perform like an M140–150), which may exceed the declared gearbox durability. We recommend using only the included Specna Arms springs. If using springs from other brands, choose M120-class springs to avoid potential damage.
• If installing a spring with progressive (irregular) winding, make sure the tighter coil end faces outward toward the spring guide.
• Never store the rifle with the battery connected.
• Never store the rifle with the piston pre-cocked (pre-cocking mode active). Always release the piston before storage to avoid spring damage.

Gate Control Station (GCS) App Download – Blu-Link module required

• Android
• iOS
• Windows/Mac

Pairing the App

To pair the GCS app with the ASTER V3 unit, you must enter its pairing code, located on the label attached to the wiring. Do not remove this label or make sure to store it safely. Without the code, pairing with the application is not possible.