SPECNA ARMS ELECTRIC RIFLE SA-A38 ONE KESTREL ETU CHAOS GREY (SPE-01-043425)

AEG RIFLE
ANODIZED ALUMINUM AND ZINC ALLOY RECEIVERS
ANODIZED ALUMINUM HANDGUARD
FULL-LENGTH 20mm STANDARD TOP RAIL
6-POSITION ADJUSTABLE RETRACTABLE STOCK WITH METAL BUFFER TUBE
300-ROUND METAL HI-CAP MAGAZINE
FLIP-UP SIGHTS
KESTREL ETU
BATTERY COMPARTMENT IN THE CALCIUM TUBE
QUICK SPRING GUIDE CHANGE
DARK MATTER BRUSHLESS MOTOR
DEANS CONNECTOR
LENGTH 810mm – 890mm
WEIGHT 2650g
BATTERY AND CHARGER NOT INCLUDED

THE KESTREL V2 BASIC ETU MODULE BY ESHOOTER IS AN ADVANCED ETU SYSTEM CHARACTERIZED BY EASE OF USE, STURDINESS AND FUNCTIONALITY.
THE KESTREL V2 BASIC IS TRIGGER-PROGRAMMABLE, WORKS WITH BRUSHED AND BRUSHLESS MOTORS IN HIGH SPEED AND HIGH TORQUE CONFIGURATIONS, INCREASES REPLICA RELIABILITY AND PROTECTS INTERNAL COMPONENTS IN CASE OF OVERLOADS DUE TO MOTOR OR BATTERY DAMAGE.

KESTREL BASIC SYSTEM FEATURES:
 – BINARY TRIGGER. THE REPLICA FIRES WHEN THE TRIGGER IS PRESSED, AND ANOTHER SHOT WILL BE FIRED WHEN THE TRIGGER IS RELEASED.
 – 5-STAGE PROGRAMMABLE PRE-COCKING WITH PISTON POSITION LEARNING FUNCTION (THIS FUNCTION REQUIRES SEVERAL SINGLE SHOTS AFTER CONNECTING THE BATTERY FOR CALIBRATION).
 – ACTIVE BRAKE. THE REPLICA PERFORMS A COMPLETE CYCLE WITH EACH SHOT, SO AS TO AVOID UNNECESSARY OVERLOADS IN THE GEARBOX DUE TO EXECUTING PART OF THE CYCLE.
– LOCKED ROTOR PROTECTION, THE FUNCTION PROTECTS THE INSIDE OF THE REPLICA IN CASE OF MOTOR DAMAGE.
– BATTERY DISCHARGE PROTECTION. BATTERY DISCHARGE PROTECTION. THE MOTOR VIBRATES, THE BLUE LED ILLUMINATES FIVE TIMES TO INDICATE BATTERY DISCHARGE.
– LOW/HIGH VOLTAGE PROTECTION. THE MODULE DETECTS THE NUMBER OF BATTERY CELLS AND ADJUSTS OPERATION TO DIFFERENT NUMBERS OF CELLS AND VOLTAGES FROM 6 V TO 17 V.

THE REPLICA OF THE SA-A33 CARBINE BY SPECNA ARMS IS MAINLY MADE OF A UNIFORM ZINC-ALUMINUM ALLOY, WITH THE USE OF STEEL ELEMENTS AT THE MOST CRITICAL POINTS OF THE REPLICA (THEREFORE ALL SCREWS, PINS AND TACTICAL SLING MOUNT ARE IN STEEL).
THE STOCK AND PISTOL GRIP ARE MADE OF POLYMER.
THE BODY OF THE REPLICA AND THE RIS RAIL ASSEMBLY HAVE UNDERGONE THE ANODIZATION PROCESS, WHICH GUARANTEES HIGH PROTECTION OF THE REPLICA FROM CORROSION.
THE PAINTING OF THE REPLICA WAS CARRIED OUT USING A POWDER COATING PROCESS, AFTER SANDBLASTING THE SURFACE.
THIS ENSURES THAT THE APPLIED PAINT IS MUCH MORE RESISTANT TO ABRASION THAN USUAL.

THE REPLICA WAS BUILT IN AN EXCEPTIONAL WAY – IN A WAY THAT HAS STILL BEEN SEEN ALMOST EXCLUSIVELY FROM MANUFACTURERS LIKE G&P OR CLASSIC ARMY – AND PERFECTLY BALANCED.
THIS GUARANTEES ALMOST IDEAL MANEUVERABILITY OF THE REPLICA, WHILE ITS WEIGHT IS, FURTHERMORE, ALMOST IMPERCEPTIBLE ONCE SHOULDERED.

THE REPLICA USES A QUICK SPRING CHANGE SYSTEM, THE SO-CALLED ENTER & CONVERT.
THIS ALLOWS A QUICK AND EFFICIENT ADJUSTMENT OF THE REPLICA'S POWER TO THE CONDITIONS EXPECTED ON THE PLAYING FIELD, WITHOUT THE NEED TO ACCESS A WORKSHOP OR SPECIALIZED TOOLS.
AFTER REMOVING THE GEARBOX FROM THE REPLICA BODY, THE SPRING REPLACEMENT PROCESS TAKES LITERALLY A FEW SECONDS.
IN LIGHT OF THE PREVAILING TREND IN EUROPE TOWARDS LEGAL LIMITS ON REPLICA MUZZLE VELOCITY AND EXISTING PROVISIONS WITHIN THE ENVIRONMENTS THEMSELVES, THIS SYSTEM GUARANTEES THE USER BROAD OPTIONS AND EXTENSIVE FREEDOM.
THE ENTER & CONVERT SYSTEM ALLOWS THE MAIN SPRING TO BE REPLACED IN A MINIMUM TIME AND THEREFORE TO ADAPT THE MUZZLE VELOCITY OF THE REPLICA TO THE PLAY AREA, GUARANTEEING AN IDEAL COMPROMISE BETWEEN WEAPON EFFECTIVENESS AND YOUR SAFETY AND THAT OF OTHER PLAYERS.

THE REPLICA HAS BEEN FULLY ADAPTED TO WORK WITH LIPO AND LIFE BATTERIES.

THE GEARBOX, REINFORCED AT CYLINDER HEAD HEIGHT, HOUSES A STEEL SPRING GUIDE THAT IS PART OF THE ENTER & CONVERT SYSTEM AND IS MOUNTED ON 8 MM BALL BEARINGS AND SHIMS, 16:1 RATIO STEEL GEARS MADE WITH CNC MACHINES.
THE SYSTEM IS SECURED WITH FOUR ANTI-REVERSAL LATCHES.
THE LIGHTWEIGHT POLYCARBONATE PISTON IS EQUIPPED WITH A STEEL TOOTH TO INCREASE ITS DURABILITY.
IT ALSO USES A TYPE 2 CYLINDER AND STEEL CUT-OFF LEVER, AS WELL AS A POLYMER HOP-UP CHAMBER.

THE REPLICA IS ALSO EQUIPPED WITH A SPECNA ARMS DARK MATTER BRUSHLESS MOTOR (27000 RPM).

THE UPGRADED VERSION FEATURES SEVERAL NEW REINFORCED PARTS, SUCH AS:
 – A REINFORCED STEEL GEAR SET
 – A STEEL SPRING GUIDE
 – A LIGHTWEIGHT POLYMER PISTON
 – A SEALED ALUMINUM PISTON HEAD
 – A SEALED METAL CYLINDER HEAD
 – A SEALED METAL NOZZLE

THE UPGRADED VERSION IS EQUIPPED WITH A TOP 22 MM RIS RAIL, A SET OF MLOK FRONT RAILS AND AN ADJUSTABLE STOCK.
A FLIP-UP SIGHT DEVICE HAS BEEN MOUNTED ON THE TOP RIS RAIL, BUT IT CAN BE FREELY REPLACED WITH ANY OPTOELECTRONIC SIGHT DEVICE.
THANKS TO AN EXTENDABLE STOCK FINISHED WITH A NON-SLIP TEXTURED BUTTPAD, IT IS POSSIBLE TO ADJUST THE LENGTH OF THE REPLICA ACCORDING TO THE SHOOTER'S BODY AND PREFERENCES.
THE FLASH HIDER IS MOUNTED ON A 14 MM CCW THREAD, WHICH ALLOWS A SOUND SUPPRESSOR TO BE ATTACHED IN ITS PLACE.
TO INCREASE GAMEPLAY REALISM, THE REPLICA IS ALSO EQUIPPED WITH A WORKING BOLT CATCH.

THE REPLICA IS ALSO EQUIPPED WITH A 300-ROUND HI-CAP MAGAZINE.

SPECNA ARMS REPLICAS ARE COMPATIBLE WITH MANY MAGAZINES AVAILABLE ON THE MARKET, INCLUDING MANUFACTURERS SUCH AS:
 – BOYI
 – AIRSOFT SYSTEMS
 – SRC
 – KING ARMS
 – MAG
 – STAR
 – ACM